Close Combat Attacks allocated towards a model with Distracting suffer a -1 to-hit modifier. This to-hit modifier cannot be combined with any other negative to-hit modifiers.

Close Combat Attacks allocated towards a model with Distracting suffer a -1 to-hit modifier. This to-hit modifier cannot be combined with any other negative to-hit modifiers.

Model parts with Harnessed cannot make Supporting Attacks and cannot use Weapons. Shooting Weapons carried by model parts with Harnessed can be used by other model parts of the same model (as long as they do not have Harnessed or Inanimate). A model with with at least one model part with Harnessed is considered to be mounted.

Model parts with Harnessed cannot make Supporting Attacks and cannot use Weapons. Shooting Weapons carried by model parts with Harnessed can be used by other model parts of the same model (as long as they do not have Harnessed or Inanimate). A model with with at least one model part with Harnessed is considered to be mounted.

Units in base contact with one or more enemy models with Fear suffer -1 Discipline. At the start of each Round of Combat, such units must take a Discipline Test, called a Fear Test. If this test is failed, the models in the unit are Shaken until the end of the Round of Combat. Models that have Fear themselves are immune to the effects of Fear.

Units in base contact with one or more enemy models with Fear suffer -1 Discipline. At the start of each Round of Combat, such units must take a Discipline Test, called a Fear Test. If this test is failed, the models in the unit are Shaken until the end of the Round of Combat. Models that have Fear themselves are immune to the effects of Fear.

- Knows 1 spell. - Can select between the Learned Spell 1 of its chosen Path and the Hereditary Spell of its army. The Wizard selects its spells as described in Spell Selection .

- Knows 1 spell. - Can select between the Learned Spell 1 of its chosen Path and the Hereditary Spell of its army. The Wizard selects its spells as described in Spell Selection .

If the attack hits with a natural to-hit roll of '6', the attack causes two hits instead of one.

If the attack hits with a natural to-hit roll of '6', the attack causes two hits instead of one.

Attacks made with a Great Weapon gain +2 Strength, +2 Armour Penetration and always strike at Initiative Step 0 (regardless of the wielder's Agility). A model using this weapon cannot simultaneously use a Shield against Melee Attacks

Attacks made with a Great Weapon gain +2 Strength, +2 Armour Penetration and always strike at Initiative Step 0 (regardless of the wielder's Agility). A model using this weapon cannot simultaneously use a Shield against Melee Attacks

All models come equipped with a Hand Weapon as their default equipment. If a model has any Close Combat Weapon other than a Hand Weapon, it cannot choose to use the Hand Weapon (unless specifically stated). Hand Weapons wielded by models on foot can be used alongside a Shield, then giving Parry

All models come equipped with a Hand Weapon as their default equipment. If a model has any Close Combat Weapon other than a Hand Weapon, it cannot choose to use the Hand Weapon (unless specifically stated). Hand Weapons wielded by models on foot can be used alongside a Shield, then giving Parry

armatura +1

Armor +1

armatura +2

+2 Armor

Range 8″, Shots 2, FO Same as user, AP Same as user, Accurate, Quick to Fire

Range 8″, Shots 2, FO Same as user, AP Same as user, Accurate, Quick to Fire

The wielder gains +1 Attack Value when using Paired Weapons. Attacks made with Paired Weapons gain +1 Offensive Skill and ignore Parry. A model using this weapon cannot simultaneously use a Shield against Melee Attacks.

The wielder gains +1 Attack Value when using Paired Weapons. Attacks made with Paired Weapons gain +1 Offensive Skill and ignore Parry. A model using this weapon cannot simultaneously use a Shield against Melee Attacks.

If the attack successfully hits with a natural to-hit roll of '6', it automatically wounds with no to-wound roll needed. Shooting Attacks using the Hopeless Shot can only automatically wound if the first to-hit roll is a natural '6'. Note that the second to-hit roll must still be successful in order to hit the target. If the attack can be turned into more than one hit (e.g. a hit with Area Attack, Battle Focus, or Penetrating), only a single hit, chosen by the attacker, automatically wounds. All other hits must roll to wound as normal.

If the attack successfully hits with a natural to-hit roll of '6', it automatically wounds with no to-wound roll needed. Shooting Attacks using the Hopeless Shot can only automatically wound if the first to-hit roll is a natural '6'. Note that the second to-hit roll must still be successful in order to hit the target. If the attack can be turned into more than one hit (e.g. a hit with Area Attack, Battle Focus, or Penetrating), only a single hit, chosen by the attacker, automatically wounds. All other hits must roll to wound as normal.

A model part with Grind Attacks resolves these attacks at its own Agility. It must choose an enemy unit in base contact with it. The chosen enemy unit suffers a number of hits equal to the value stated in brackets (X). These hits are resolved with the model part’s own Strength and Armour Penetration. If a model has both Grind Attacks and Impact Hits , it may only use one of these rules in the same Round of Combat (its controlling player may choose which). When several model parts in the same unit have Grind Attacks and when X is a random number (e.g. Grind Attacks (2D3)), roll for the number of hits separately for each model part.

A model part with Grind Attacks resolves these attacks at its own Agility. It must choose an enemy unit in base contact with it. The chosen enemy unit suffers a number of hits equal to the value stated in brackets (X). These hits are resolved with the model part’s own Strength and Armour Penetration. If a model has both Grind Attacks and Impact Hits , it may only use one of these rules in the same Round of Combat (its controlling player may choose which). When several model parts in the same unit have Grind Attacks and when X is a random number (e.g. Grind Attacks (2D3)), roll for the number of hits separately for each model part.

At Initiative Step 10, a charging model part with Impact Hits must choose an enemy unit that is in base contact with the attacking model's Front Facing. This unit suffers a number of hits equal to the value stated in brackets (X). These hits are resolved with the attacking model part's Strength and Armour Penetration. If a model has both Grind Attacks and Impact Hits, it may only use one of these rules in the same Round of Combat (its controlling player may choose which). In multipart models, only model parts that also have Harnessed or Inanimate can use their Impact Hits. When several models in the same unit have Impact Hits, and when X is a random number (e.g. Impact Hits (D6)), roll for the number of hits separately for each model part.

At Initiative Step 10, a charging model part with Impact Hits must choose an enemy unit that is in base contact with the attacking model's Front Facing. This unit suffers a number of hits equal to the value stated in brackets (X). These hits are resolved with the attacking model part's Strength and Armour Penetration. If a model has both Grind Attacks and Impact Hits, it may only use one of these rules in the same Round of Combat (its controlling player may choose which). In multipart models, only model parts that also have Harnessed or Inanimate can use their Impact Hits. When several models in the same unit have Impact Hits, and when X is a random number (e.g. Impact Hits (D6)), roll for the number of hits separately for each model part.

The attack may not be used if the attacking model has made an Advance Move, March Move, Reform or Pivot during the current Player Turn.

The attack may not be used if the attacking model has made an Advance Move, March Move, Reform or Pivot during the current Player Turn.

+1 Armour Hand Weapons wielded by models on foot can be used alongside a Shield, then giving Parry.

+1 Armour Hand Weapons wielded by models on foot can be used alongside a Shield, then giving Parry.

Units with at least one model with Scoring are considered to be Scoring Units, which are used for winning Secondary Objectives (see section XVI.2 “Scoring Secondary Objectives", page 67). Every army needs a few Scoring units to be able to complete Secondary Objectives, which is why units with Scoring are marked in the Army Books with a special pennant icon: Scoring can be lost during the game: - A unit that is Fleeing loses Scoring for as long as it if Fleeing. - An Ambushing unit that enters the Battlefield on Game Turn 4 or later loses Scoring. - A unit that has performed a Post-Combat Reform loses Scoring until the start of the following Player Turn.

Units with at least one model with Scoring are considered to be Scoring Units, which are used for winning Secondary Objectives (see section XVI.2 “Scoring Secondary Objectives", page 67). Every army needs a few Scoring units to be able to complete Secondary Objectives, which is why units with Scoring are marked in the Army Books with a special pennant icon: Scoring can be lost during the game: - A unit that is Fleeing loses Scoring for as long as it if Fleeing. - An Ambushing unit that enters the Battlefield on Game Turn 4 or later loses Scoring. - A unit that has performed a Post-Combat Reform loses Scoring until the start of the following Player Turn.

Attacks & Weapons, Melee A charging model part with Devastating Charge, or using a weapon with Devastating Charge, gains the Model Rules and Characteristic modifiers stated in brackets. For example, a charging model part with Devastating Charge (+1 Strength, Poison Attacks) gains +1 Strength and Poison Attacks when it is charging. This rule is cumulative: a model part with several instances of Devastating Charge applies all Attack Attributes and Characteristics modifiers from all of them when charging.

Attacks & Weapons, Melee A charging model part with Devastating Charge, or using a weapon with Devastating Charge, gains the Model Rules and Characteristic modifiers stated in brackets. For example, a charging model part with Devastating Charge (+1 Strength, Poison Attacks) gains +1 Strength and Poison Attacks when it is charging. This rule is cumulative: a model part with several instances of Devastating Charge applies all Attack Attributes and Characteristics modifiers from all of them when charging.

If more than half of a unit's models are Fearless, the unit automatically passes Panic Tests and Decimated Tests and cannot declare a Flee Charge Reaction (unless already Fleeing). Models that are Fearless are also immune to the effects of Fear.

If more than half of a unit's models are Fearless, the unit automatically passes Panic Tests and Decimated Tests and cannot declare a Flee Charge Reaction (unless already Fleeing). Models that are Fearless are also immune to the effects of Fear.

When a unit composed entirely of models with Swiftstride rolls Charge Range, Flee Distance, Pursuit Distance or Overrun Distance, it rolls an additional D6 (normally this will lead to rolling 3D6) and discards the lowest D6 rolled.

When a unit composed entirely of models with Swiftstride rolls Charge Range, Flee Distance, Pursuit Distance or Overrun Distance, it rolls an additional D6 (normally this will lead to rolling 3D6) and discards the lowest D6 rolled.

A unit with at least one model with Stubborn ignores any Combat Score penalties to its Discipline when taking Break Tests or Combat Reform Discipline Tests.

A unit with at least one model with Stubborn ignores any Combat Score penalties to its Discipline when taking Break Tests or Combat Reform Discipline Tests.

At step 8 of the Pre-­Game Sequence (after Spell Selection) an army that includes units with Scout must state which of its units with Scout will use it, starting with the player that picked the Deployment Zone. Deploy your army as usual, but without deploying any of the Scouting units. These units are placed after all other non-Scouting units have been deployed. They can either be deployed in your Deployment Zone, using the normal rules, or they can be deployed outside the Deployment Zone, but must be more than 18" away from any enemy units. This is decreased to 12" if the Scouting unit is deployed entirely within a Forest, Ruins, Field, Building, or Water Terrain Feature. Scouting units that are deployed outside their player's Deployment Zone may not Declare Charges in the first Player Turn (if their side has the first turn). If both players have Scouting units, alternate deploying one unit at a time, starting with the player that finished deploying first.

At step 8 of the Pre-­Game Sequence (after Spell Selection) an army that includes units with Scout must state which of its units with Scout will use it, starting with the player that picked the Deployment Zone. Deploy your army as usual, but without deploying any of the Scouting units. These units are placed after all other non-Scouting units have been deployed. They can either be deployed in your Deployment Zone, using the normal rules, or they can be deployed outside the Deployment Zone, but must be more than 18" away from any enemy units. This is decreased to 12" if the Scouting unit is deployed entirely within a Forest, Ruins, Field, Building, or Water Terrain Feature. Scouting units that are deployed outside their player's Deployment Zone may not Declare Charges in the first Player Turn (if their side has the first turn). If both players have Scouting units, alternate deploying one unit at a time, starting with the player that finished deploying first.

A unit consisting solely of models with Feigned Flight that voluntarily chooses to Flee as a Charge Reaction, and subsequently passes a Rally Test in its next Player Turn, doesn't become Shaken. Furthermore, the Reform that is made after Rallying in this case doesn't prevent the unit from moving nor from shooting (but it still counts as having moved for shooting purposes). This rule cannot be applied if a unit fails to rally on the next friendly Player Turn or involuntarily Flees, such as a result of a failed Panic Test or if it was already Fleeing when being charged.

A unit consisting solely of models with Feigned Flight that voluntarily chooses to Flee as a Charge Reaction, and subsequently passes a Rally Test in its next Player Turn, doesn't become Shaken. Furthermore, the Reform that is made after Rallying in this case doesn't prevent the unit from moving nor from shooting (but it still counts as having moved for shooting purposes). This rule cannot be applied if a unit fails to rally on the next friendly Player Turn or involuntarily Flees, such as a result of a failed Panic Test or if it was already Fleeing when being charged.

The model gains Light Troops and Swiftstride. Units composed entirely of models with Fly may make Flying Movements when performing a Move Chargers move, an Advance Move, or a March Move. When a unit makes a Flying Movement, substitute its models' Advance Rate with the first value given in brackets (X), and their March Rate with the second value given in brackets (Y). All modifiers to ground movement values are also applied to the flying values of a model. Units using Flying Movement ignore all Terrain Features and units during the Flying Movement (from their starting to their ending position), but must abide by the Unit Spacing rule at the end of the move (unless charging, when the normal exceptions to the Unit Spacing rule apply). They are still affected by the effects of the Terrain Features from which they take off and in which they land.

The model gains Light Troops and Swiftstride. Units composed entirely of models with Fly may make Flying Movements when performing a Move Chargers move, an Advance Move, or a March Move. When a unit makes a Flying Movement, substitute its models' Advance Rate with the first value given in brackets (X), and their March Rate with the second value given in brackets (Y). All modifiers to ground movement values are also applied to the flying values of a model. Units using Flying Movement ignore all Terrain Features and units during the Flying Movement (from their starting to their ending position), but must abide by the Unit Spacing rule at the end of the move (unless charging, when the normal exceptions to the Unit Spacing rule apply). They are still affected by the effects of the Terrain Features from which they take off and in which they land.

Fortitude is a Special Save . Fortitude Saves cannot be taken against attacks with Lethal Strike that rolled a natural 6+ to wound, or against attacks with Flaming Attacks

Fortitude is a Special Save . Fortitude Saves cannot be taken against attacks with Lethal Strike that rolled a natural 6+ to wound, or against attacks with Flaming Attacks

At the start of the Charge Phase, each of your nonFleeing units with at least one model with Frenzy that is unengaged, does not contain any Shaken models, and has an enemy unit inside its Front Arc within the unit’s Advance Rate +7″ must take a Discipline Test, called a Frenzy Test. If the test is failed, the whole unit must declare a Charge this Player Turn if possible. Frenzy Tests and Restrain Pursuit Tests taken by units with at least one model with Frenzy are subject to Maximised Roll. If there are different Advance Rates available in the unit, the Advance Rate used for the Frenzy Test and for the Charge Range is determined as follows: • If a model has more than one Advance Rate (e.g. due to Fly), the model must use the Advance Rate that has the highest chance of completing the Charge. • If a unit contains models with different Advance Rates, the unit must use the highest Advance Rate that all models in the unit can use (which will usually be the lowest Advance Rate in the unit). For example, a model with Advance Rate 2″ and Fly (8″, 16″) must use the Advance Rate from Fly. And if a Character in a Combined Unit has Advance Rate 4″ while the R&F models have 6″, the Combined Unit must use Advance Rate 4″. Note that when a unit is forced to declare a Charge due to a failed Frenzy Test, it is not forced to Charge the enemy unit that triggered the Frenzy Test.

At the start of the Charge Phase, each of your nonFleeing units with at least one model with Frenzy that is unengaged, does not contain any Shaken models, and has an enemy unit inside its Front Arc within the unit’s Advance Rate +7″ must take a Discipline Test, called a Frenzy Test. If the test is failed, the whole unit must declare a Charge this Player Turn if possible. Frenzy Tests and Restrain Pursuit Tests taken by units with at least one model with Frenzy are subject to Maximised Roll. If there are different Advance Rates available in the unit, the Advance Rate used for the Frenzy Test and for the Charge Range is determined as follows: • If a model has more than one Advance Rate (e.g. due to Fly), the model must use the Advance Rate that has the highest chance of completing the Charge. • If a unit contains models with different Advance Rates, the unit must use the highest Advance Rate that all models in the unit can use (which will usually be the lowest Advance Rate in the unit). For example, a model with Advance Rate 2″ and Fly (8″, 16″) must use the Advance Rate from Fly. And if a Character in a Combined Unit has Advance Rate 4″ while the R&F models have 6″, the Combined Unit must use Advance Rate 4″. Note that when a unit is forced to declare a Charge due to a failed Frenzy Test, it is not forced to Charge the enemy unit that triggered the Frenzy Test.

The model can draw Lines of Sight in any direction (i.e. it is not limited by the Front Arc) from any point on its base (remember that Charge Moves are limited by a single Wheel of no more than 90°, and that Stand and Shoot Charge Reactions can only be done against enemies in the Front Arc) and can always use Shooting Attacks from any rank (they are not limited to shooting from first and second rank). Units with at least one R&F model with Skirmisher are formed into a skirmish formation. They are not placed in base to base contact with each other. Instead, models are placed with a 12.5 mm distance between them. This gap is considered part of the unit for Cover purposes, and will have the same Size as the models in the unit. Other than this gap between models, units with Skirmisher follow the normal rules for forming units and therefore have a Front, two Flanks, a Rear, can perform Supporting Attacks, and so on. Units in skirmish formation gain Hard Target and Light Troops, never block Line of Sight, and when units in skirmish formation would contribute to Hard Cover, they contribute to Soft Cover instead.

The model can draw Lines of Sight in any direction (i.e. it is not limited by the Front Arc) from any point on its base (remember that Charge Moves are limited by a single Wheel of no more than 90°, and that Stand and Shoot Charge Reactions can only be done against enemies in the Front Arc) and can always use Shooting Attacks from any rank (they are not limited to shooting from first and second rank). Units with at least one R&F model with Skirmisher are formed into a skirmish formation. They are not placed in base to base contact with each other. Instead, models are placed with a 12.5 mm distance between them. This gap is considered part of the unit for Cover purposes, and will have the same Size as the models in the unit. Other than this gap between models, units with Skirmisher follow the normal rules for forming units and therefore have a Front, two Flanks, a Rear, can perform Supporting Attacks, and so on. Units in skirmish formation gain Hard Target and Light Troops, never block Line of Sight, and when units in skirmish formation would contribute to Hard Cover, they contribute to Soft Cover instead.

Inanimate - Melee Model parts with Inanimate cannot make Close Combat Attacks and cannot use Shooting Weapons. Shooting Weapons carried by model parts with Inanimate can be used by other model parts of the same model (as long as they do not have Harnessed or Inanimate).

Inanimate - Melee Model parts with Inanimate cannot make Close Combat Attacks and cannot use Shooting Weapons. Shooting Weapons carried by model parts with Inanimate can be used by other model parts of the same model (as long as they do not have Harnessed or Inanimate).

The model gains Fearless and its unit automatically passes all Break Tests. Characters with Unbreakable can only join units consisting entirely of models with Unbreakable. Units with one or more models with Unbreakable can only be joined by Characters with Unbreakable.

The model gains Fearless and its unit automatically passes all Break Tests. Characters with Unbreakable can only join units consisting entirely of models with Unbreakable. Units with one or more models with Unbreakable can only be joined by Characters with Unbreakable.

The model cannot be the General.

The model cannot be the General.

The model cannot Pursue, Declare Charges or Declare Flee as Charge Reaction. Characters can never join units with War Machines, and Characters with War Machine cannot join units at all. When a War Machine fails a Panic Test, instead of Fleeing it is Shaken until the end of the next Player Turn. War Machines that fail a Break Test are automatically destroyed. War Machines and units Engaged in Combat with them cannot make Combat Reforms. When a unit charges a War Machine, it can move into base contact by having its Front Facing contact any point of the War Machine's base (it must still maximise the number of models in base contact, see subsection II.1.A “Bases and Base Contact", page 4 and Figure 1 page 4). No Align Move is allowed. Ignore the War Machine's Facing, as it does not have any due to its round base.

The model cannot Pursue, Declare Charges or Declare Flee as Charge Reaction. Characters can never join units with War Machines, and Characters with War Machine cannot join units at all. When a War Machine fails a Panic Test, instead of Fleeing it is Shaken until the end of the next Player Turn. War Machines that fail a Break Test are automatically destroyed. War Machines and units Engaged in Combat with them cannot make Combat Reforms. When a unit charges a War Machine, it can move into base contact by having its Front Facing contact any point of the War Machine's base (it must still maximise the number of models in base contact, see subsection II.1.A “Bases and Base Contact", page 4 and Figure 1 page 4). No Align Move is allowed. Ignore the War Machine's Facing, as it does not have any due to its round base.

Attacks made with a Lance and allocated toward models in the wielders' Front Facing gain Devastating Charge (+2 Strength, +2 Armour Penetration). Infantry cannot use Lances.

Attacks made with a Lance and allocated toward models in the wielders' Front Facing gain Devastating Charge (+2 Strength, +2 Armour Penetration). Infantry cannot use Lances.

Units composed entirely of models with Light Troops are allowed to make any number of Reforms when performing Advance Moves or March Moves. They are allowed to shoot even if they Marched or Reformed. No model can end its movement with its centre further away than its March Rate from its starting position, around any obstructions (including the Unit Spacing rule). This means that when checking the distance travelled by a model, check the path the model would have taken if it was alone, with the exception that the unit as a whole cannot break the Unit Spacing rule while performing the move. If a model performed any action during the movement (such as a Sweeping Attack), the distance moved is counted from its starting position to the point on the Battlefield where it performed that action and then to its final position. If more than half the models in a unit have Light Troops, the unit always counts as having 0 Full Ranks. Characters with Light Troops that are joined to units with one or more models without Light Troops, lose this rule for as long as they remain with the unit. An Infantry Character joined to an Infantry unit with both Light Troops and the same Size as the Character gains Light Troops for as long as it remains with the unit.

Units composed entirely of models with Light Troops are allowed to make any number of Reforms when performing Advance Moves or March Moves. They are allowed to shoot even if they Marched or Reformed. No model can end its movement with its centre further away than its March Rate from its starting position, around any obstructions (including the Unit Spacing rule). This means that when checking the distance travelled by a model, check the path the model would have taken if it was alone, with the exception that the unit as a whole cannot break the Unit Spacing rule while performing the move. If a model performed any action during the movement (such as a Sweeping Attack), the distance moved is counted from its starting position to the point on the Battlefield where it performed that action and then to its final position. If more than half the models in a unit have Light Troops, the unit always counts as having 0 Full Ranks. Characters with Light Troops that are joined to units with one or more models without Light Troops, lose this rule for as long as they remain with the unit. An Infantry Character joined to an Infantry unit with both Light Troops and the same Size as the Character gains Light Troops for as long as it remains with the unit.

The unit cannot Declare Charges and cannot move normally (Advance, March, Reform) in the Movement Phase (which also means they cannot perform Magical Moves). The model loses Swiftstride (and can never gain it), but always charges, Flees, Pursues and Overruns the distance stated in brackets. In the Movement Phase, at the end of step 2 of the the it with Random Movement moves using the rules for Pursuing units, except that they can freely choose which direction to rotate towards before rolling the Pursuit Distance, cannot move off the Board Edge and only take Dangerous Terrain Tests if they actually charge an enemy unit (they still test as normal when Fleeing, Pursuing a Broken enemy or Overrunning). Whenever a unit with Random Movement needs a March Rate (e.g. when Post-Combat Reforming), use the potential maximum value of X as its March Rate. Characters with Random Movement can only join units with Random Movement (by moving into contact with them during the Movement Phase or by being deployed inside), and units with Random Movement can only be joined by Characters with Random Movement. Units with Random Movement cannot enter Buildings. If a unit has several sets of Random Movement, use the one with the lowest average (in case of a tie, you may choose which version to use). A model with Random Movement cannot move in the same phase as it arrives on the Battlefield as Reinforcement (Dawn Assault) or Ambusher.

The unit cannot Declare Charges and cannot move normally (Advance, March, Reform) in the Movement Phase (which also means they cannot perform Magical Moves). The model loses Swiftstride (and can never gain it), but always charges, Flees, Pursues and Overruns the distance stated in brackets. In the Movement Phase, at the end of step 2 of the the it with Random Movement moves using the rules for Pursuing units, except that they can freely choose which direction to rotate towards before rolling the Pursuit Distance, cannot move off the Board Edge and only take Dangerous Terrain Tests if they actually charge an enemy unit (they still test as normal when Fleeing, Pursuing a Broken enemy or Overrunning). Whenever a unit with Random Movement needs a March Rate (e.g. when Post-Combat Reforming), use the potential maximum value of X as its March Rate. Characters with Random Movement can only join units with Random Movement (by moving into contact with them during the Movement Phase or by being deployed inside), and units with Random Movement can only be joined by Characters with Random Movement. Units with Random Movement cannot enter Buildings. If a unit has several sets of Random Movement, use the one with the lowest average (in case of a tie, you may choose which version to use). A model with Random Movement cannot move in the same phase as it arrives on the Battlefield as Reinforcement (Dawn Assault) or Ambusher.

Ogni volta che il modello perde un Punto Vita, ottiene +1 Numero di Attacchi. Ogni volta che il modello ottiene un Punto Vita, perde -1 Numero di Attacchi.

Whenever the model loses a Health Point, it gains +1 Attack Value. Whenever it gains a Health Point, it suffers -1 Attack Value.

The wearer gains +1 Armour and suffers −2 Offensive Skill.

The wearer gains +1 Armour and suffers −2 Offensive Skill.

The wearer gains Aegis (4+). In addition, its Armour is set to 3 and can never be improved beyond this.

The wearer gains Aegis (4+). In addition, its Armour is set to 3 and can never be improved beyond this.

When performing Close Combat Attacks other than Crush Attacks, the wielder [b]must[/b] perform 3 additional Close Combat Attacks in the same Initiative Step whose Strength is [b]always[/b] set to 5 and whose Armour Penetration is [b]always[/b] set to 2.

When performing Close Combat Attacks other than Crush Attacks, the wielder [b]must[/b] perform 3 additional Close Combat Attacks in the same Initiative Step whose Strength is [b]always[/b] set to 5 and whose Armour Penetration is [b]always[/b] set to 2.

The bearer can cast a Bound Spell, Power Level (4/8): Type: Augment. Range 18″. Duration: One Turn. The target gains +1 to hit with its Close Combat Attacks.

The bearer can cast a Bound Spell, Power Level (4/8): Type: Augment. Range 18″. Duration: One Turn. The target gains +1 to hit with its Close Combat Attacks.

The wearer gains +1 Armour and Aegis (3+, against Flaming Attacks). The wearer automatically fails all Fortitude Saves.

The wearer gains +1 Armour and Aegis (3+, against Flaming Attacks). The wearer automatically fails all Fortitude Saves.

The bearer gains Breath Attack (Str 3, AP 0, Flaming Attacks).

The bearer gains Breath Attack (Str 3, AP 0, Flaming Attacks).

One use only. May be activated after Siphon the Veil (at the end of step 3 of the Magic Phase Sequence). When activated, pick an enemy model and select one of its Attribute, Bound, or Learned Spells. The selected model cannot cast the chosen instance of the spell during this Magic Phase. Only a single Binding Scroll may be activated during the same phase.

One use only. May be activated after Siphon the Veil (at the end of step 3 of the Magic Phase Sequence). When activated, pick an enemy model and select one of its Attribute, Bound, or Learned Spells. The selected model cannot cast the chosen instance of the spell during this Magic Phase. Only a single Binding Scroll may be activated during the same phase.

Unless the bearer has Protean Magic, it knows one additional Learned Spell that it selects from the Learned Spells 1, 2, 3, and 4 of its chosen Path. In addition, the bearer cannot cast the Hereditary Spell.

Unless the bearer has Protean Magic, it knows one additional Learned Spell that it selects from the Learned Spells 1, 2, 3, and 4 of its chosen Path. In addition, the bearer cannot cast the Hereditary Spell.

The bearer gains Strider and, unless using Flying Movement, +2″ Advance Rate up to a maximum of 10″, and +4″ March Rate up to a maximum of 20″.

The bearer gains Strider and, unless using Flying Movement, +2″ Advance Rate up to a maximum of 10″, and +4″ March Rate up to a maximum of 20″.

The firsts Dispelling Attempt in each enemy Magic Phase gains a +2 Dispelling Modifier, provided the bearer is on the Battlefield. When using a single Magic Dice for this Dispelling Attempt, a natural roll of ‘1’ or ‘2’ on the Magic Dice is always a failed Dispelling Attempt, regardless of any modifiers.

The firsts Dispelling Attempt in each enemy Magic Phase gains a +2 Dispelling Modifier, provided the bearer is on the Battlefield. When using a single Magic Dice for this Dispelling Attempt, a natural roll of ‘1’ or ‘2’ on the Magic Dice is always a failed Dispelling Attempt, regardless of any modifiers.

Attacks made with this weapon gain +6 Armour Penetration, become Magical Attacks, and can never wound on to-wound rolls better than 3+.

Attacks made with this weapon gain +6 Armour Penetration, become Magical Attacks, and can never wound on to-wound rolls better than 3+.

One use only. May be activated when the bearer’s model fails an Armour Save. This failed Armour Save may be rerolled.

One use only. May be activated when the bearer’s model fails an Armour Save. This failed Armour Save may be rerolled.

The bearer gains the Hereditary Spell during Spell Selection, always knows it in addition to its other spells, cannot select it during Spell Selection, andcannot replace or otherwise lose it.

The bearer gains the Hereditary Spell during Spell Selection, always knows it in addition to its other spells, cannot select it during Spell Selection, andcannot replace or otherwise lose it.

At the start of each Round of Combat, the wielder may choose to have attacks made with this weapon become Flaming Attacks and Magical Attacks.

At the start of each Round of Combat, the wielder may choose to have attacks made with this weapon become Divine Attacks and Flaming Attacks and Magical Attacks.

The wielder gains +1 Attack Value while using this weapon. Attacks made with this weapon become Magical Attacks and always have at least Strength 5 and at least Armour Penetration 2.

The wielder gains +1 Attack Value while using this weapon. Attacks made with this weapon become Magical Attacks and always have at least Strength 5 and at least Armour Penetration 2.

During Spell Selection, randomise a Magic Path (from all Paths in this book). The bearer is a Wizard Apprentice using the randomised Path. It cannot select the Hereditary Spell. The bearer cannot take any Special Items nor any other upgrades that are restricted to Wizards (or any types of Wizards).

During Spell Selection, randomise a Magic Path (from all Paths in this book). The bearer is a Wizard Apprentice using the randomised Path. It cannot select the Hereditary Spell. The bearer cannot take any Special Items nor any other upgrades that are restricted to Wizards (or any types of Wizards).

The model’s range of Commanding Presence (if available) is increased by 3″, up to a maximum of 18″. If the model does not have Commanding Presence, it gains Commanding Presence whose range is always set to 3″.

The model’s range of Commanding Presence (if available) is increased by 3″, up to a maximum of 18″. If the model does not have Commanding Presence, it gains Commanding Presence whose range is always set to 3″.

The bearer may choose to reroll its failed Armour Saves while using this Shield. If the reroll from Dusk Forged is failed, the bearer automatically fails any Special Save against that wound.

The bearer may choose to reroll its failed Armour Saves while using this Shield. If the reroll from Dusk Forged is failed, the bearer automatically fails any Special Save against that wound.

The wearer gains +1 Armour and Fortitude (4+).

The wearer gains +1 Armour and Fortitude (4+).

The wielder gains +2 Offensive Skill and +2 Agility while using this weapon, and attacks made with it become Magical Attacks.

The wielder gains +2 Offensive Skill and +2 Agility while using this weapon, and attacks made with it become Magical Attacks.

The bearer gains Aegis (2+, against Flaming Attacks). The bearer automatically fails all Fortitude Saves.

The bearer gains Aegis (2+, against Flaming Attacks). The bearer automatically fails all Fortitude Saves.

Failed to-wound rolls from attacks made with this weapon must be rerolled.

Failed to-wound rolls from attacks made with this weapon must be rerolled.

The bearer may choose up to two Paths on the Army List instead of one (from the ones normally available to it). During Spell Selection, choose which one of the two Paths to use. The bearer cannot select from the Learned Spells 5 and 6 of its chosen Path.

The bearer may choose up to two Paths on the Army List instead of one (from the ones normally available to it). During Spell Selection, choose which one of the two Paths to use. The bearer cannot select from the Learned Spells 5 and 6 of its chosen Path.

The wearer’s Armour is set to 5 and can never be improved beyond this.

The wearer’s Armour is set to 5 and can never be improved beyond this.

The wearer gains +2 Armour against non-Magical Attacks.

The wearer gains +2 Armour against non-Magical Attacks.

While using this Shield, the bearer cannot use Parry, gains +1 Armour, and Impact Hits distributed onto the bearer suffer −2 Armour Penetration.

While using this Shield, the bearer cannot use Parry, gains +1 Armour, and Impact Hits distributed onto the bearer suffer −2 Armour Penetration.

One use only. May be activated at the start of any Melee Phase. Until the end of the Player Turn, the bearer's unit gains [b]Fearless[/b] and [b]Unstable[/b] even if the bearer is removed as a casualty.

One use only. May be activated at the start of any Melee Phase. Until the end of the Player Turn, the bearer's unit gains [b]Fearless[/b] and [b]Unstable[/b] even if the bearer is removed as a casualty.

The wielder gains +X Attack Value while using this weapon, and attacks made with this weapon gain +X Strength, +X Armour Penetration, and Magical Attacks, where X is equal to the number of enemy Characters in base contact with the wielder’s unit. This bonus is calculated at the Initiative Step when the attacks are made.

The wielder gains +X Attack Value while using this weapon, and attacks made with this weapon gain +X Strength, +X Armour Penetration, and Magical Attacks, where X is equal to the number of enemy Characters in base contact with the wielder’s unit. This bonus is calculated at the Initiative Step when the attacks are made.

The bearer can cast Hand of Heaven (Thaumaturgy) as a Bound Spell with Power Level (4/8).

The bearer can cast Hand of Heaven (Thaumaturgy) as a Bound Spell with Power Level (4/8).

The bearer can cast Totemic Summon (Shamanism) as a Bound Spell with Power Level (4/8).

The bearer can cast Totemic Summon (Shamanism) as a Bound Spell with Power Level (4/8).

The bearer gains Magic Resistance (2).

The bearer gains Magic Resistance (2).

Roll a single D3 at the Initiative Step in which the wielder is attacking. During this Initiative Step, the wielder gains a modifier equal to the result of the D3 roll to its Attack Value, Strength, and Armour Penetration while using this weapon.

Roll a single D3 at the Initiative Step in which the wielder is attacking. During this Initiative Step, the wielder gains a modifier equal to the result of the D3 roll to its Attack Value, Strength, and Armour Penetration while using this weapon.

When successfully wounded, the bearer may choose to use the attacker's Armour value and/or its Special Save: • Use the Armour value that the attacking model would have against the attack that inflicted the wound (including Conditional Application, modifiers, etc.). If so, the bearer cannot use its own Armour (including any modifiers), if available. • Use the Special Save that the attacking model would have against the attack that inflicted the wound (including ConditionalApplication,modifiers,etc.). Ifso,thebearercannotuseitsownSpecialSave(includinganymodifiers), if available.

When successfully wounded, the bearer may choose to use the attacker's Armour value and/or its Special Save: • Use the Armour value that the attacking model would have against the attack that inflicted the wound (including Conditional Application, modifiers, etc.). If so, the bearer cannot use its own Armour (including any modifiers), if available. • Use the Special Save that the attacking model would have against the attack that inflicted the wound (including ConditionalApplication,modifiers,etc.). Ifso,thebearercannotuseitsownSpecialSave(includinganymodifiers), if available.

One use only. May be activated at the start of any Round of Combat. Until the end of the Player Turn the bearer gains Crush Attack.

One use only. May be activated at the start of any Round of Combat. Until the end of the Player Turn the bearer gains Crush Attack.

One use only. May be activated at the start of any Round of Combat. Until the end of the Player Turn, the bearer gains +3 Agility.

One use only. May be activated at the start of any Round of Combat. Until the end of the Player Turn, the bearer gains +3 Agility.

One use only. A Wizard with this Artefact may add a single Magic Dice from its Magic Dice pool to one of its casting rolls or dispelling rolls, after seeing the casting or dispelling roll (note that casting rolls cannot exceed the limit of max 5 Magic Dice).

One use only. A Wizard with this Artefact may add a single Magic Dice from its Magic Dice pool to one of its casting rolls or dispelling rolls, after seeing the casting or dispelling roll (note that casting rolls cannot exceed the limit of max 5 Magic Dice).

Add one Veil Token to your Veil Token pool whenever: • A friendly unit with at least one model with Goblin Cunning passes a Rally Test. • A friendly unit with at least one model with Brood Rivalry successfully completes a Charge.

Add one Veil Token to your Veil Token pool whenever: • A friendly unit with at least one model with Goblin Cunning passes a Rally Test. • A friendly unit with at least one model with Brood Rivalry successfully completes a Charge.

The bearer gains Aegis (5+).

The bearer gains Aegis (5+).

The bearer gains Channel (1).

The bearer gains Channel (1).

The bearer's model gains +1 Health Point and its Resilience is [b]set[/b] to 6.

The bearer's model gains +1 Health Point and its Resilience is [b]set[/b] to 6.

Attacks made with this weapon gain +1 Strength, +1 Armour Penetration, and become Magical Attacks. Strength modifiers from this weapon (combining both mundane and Weapon Enchantment modifiers) cannot exceed +2 (but can exceed +2 through modifiers from other sources, such as spells).

Attacks made with this weapon gain +1 Strength, +1 Armour Penetration, and become Magical Attacks. Strength modifiers from this weapon (combining both mundane and Weapon Enchantment modifiers) cannot exceed +2 (but can exceed +2 through modifiers from other sources, such as spells).

The bearer gains Magic Resistance (1). If the unit contains a model with another instance of Magic Resistance, it increases that model’s Magic Resistance value by 1 instead.

The bearer gains Magic Resistance (1). If the unit contains a model with another instance of Magic Resistance, it increases that model’s Magic Resistance value by 1 instead.

The bearer’s unit may reroll failed Panic Tests. If the Battle Standard Bearer or the General is part of the bearer’s unit, it automatically passes Panic Tests instead.

The bearer’s unit may reroll failed Panic Tests. If the Battle Standard Bearer or the General is part of the bearer’s unit, it automatically passes Panic Tests instead.

A unit with one or more Banners of Speed gains +1″ Advance Rate and +2″ March Rate.

A unit with one or more Banners of Speed gains +1″ Advance Rate and +2″ March Rate.

One use only. May be activated during the owner’s Movement Phase. All Infantry models in the bearer’s unit always have March Rate 15″, until the end of the Player Turn. Only a single Banner of the Relentless Company may be activated during the same phase.

One use only. May be activated during the owner’s Movement Phase. All Infantry models in the bearer’s unit always have March Rate 15″, until the end of the Player Turn. Only a single Banner of the Relentless Company may be activated during the same phase.

One use only. May be activated at the start of a Round of Combat or before shooting with the bearer’s unit. The bearer’s unit gains Flaming Attacks. If activated when Engaged in Combat, the effect lasts until the bearer’s unit is no longer Engaged in Combat. If activated before shooting with the bearer’s unit, the effect lasts until the end of the phase.

One use only. May be activated at the start of a Round of Combat or before shooting with the bearer’s unit. The bearer’s unit gains Flaming Attacks. If activated when Engaged in Combat, the effect lasts until the bearer’s unit is no longer Engaged in Combat. If activated before shooting with the bearer’s unit, the effect lasts until the end of the phase.

A unit with one Legion Standard increases the maximum of its Rank Bonus by +1 (normally this means the unit can add up to 4 Full Ranks to its Combat Score). A unit with two or more Legion Standards increases the maximum of its Rank Bonus by +2 instead.

A unit with one Legion Standard increases the maximum of its Rank Bonus by +1 (normally this means the unit can add up to 4 Full Ranks to its Combat Score). A unit with two or more Legion Standards increases the maximum of its Rank Bonus by +2 instead.

The bearer’s unit gains Strider.

The bearer’s unit gains Strider.

Models with Goblin Cunning in the bearer's unit gain [b]Strider (Forest)[/b]. In addition, Close Combat Attacks made by R&F model parts without Harnessed and with Goblin Cunning in the bearer's unit become [b]Poison Attacks[/b].

Models with Goblin Cunning in the bearer's unit gain [b]Strider (Forest)[/b]. In addition, Close Combat Attacks made by R&F model parts without Harnessed and with Goblin Cunning in the bearer's unit become [b]Poison Attacks[/b].

Roll a D3 at the start of each Round of Combat that the bearer's unit is fighting. R&F model parts without Harnessed in the bearer's unit gain one of the following effects until the end of the Round of Combat depending on the result of the roll: 1. [b]Distracting[/b] 2. [b]Lethal Strike[/b] 3. [b]Lightning Reflexes[/b]

Roll a D3 at the start of each Round of Combat that the bearer's unit is fighting. R&F model parts without Harnessed in the bearer's unit gain one of the following effects until the end of the Round of Combat depending on the result of the roll: 1. [b]Distracting[/b] 2. [b]Lethal Strike[/b] 3. [b]Lightning Reflexes[/b]

For the purpose of Brood Rivalry, the bearer's unit is always treated as if a model with Brood Rivalry from another friendly unit is Engaged anywhere on the Battlefield.

For the purpose of Brood Rivalry, the bearer's unit is always treated as if a model with Brood Rivalry from another friendly unit is Engaged anywhere on the Battlefield.