Impero Di Sonnstahl
Correspondence of translations with another language
Rules and Equipments used by the army
| IT | EN |
|---|---|
|
Egida
|
Aegis
|
|
Arco
|
Bow
|
|
Grande Arma
Attacks made with a Great Weapon gain +2 Strength, +2 Armour Penetration and always strike at Initiative Step 0 (regardless of the wielder's Agility). A model using this weapon cannot simultaneously use a Shield against Melee Attacks
|
Great Weapon
Attacks made with a Great Weapon gain +2 Strength, +2 Armour Penetration and always strike at Initiative Step 0 (regardless of the wielder's Agility). A model using this weapon cannot simultaneously use a Shield against Melee Attacks
|
|
Arma a Una Mano
All models come equipped with a Hand Weapon as their default equipment. If a model has any Close Combat Weapon other than a Hand Weapon, it cannot choose to use the Hand Weapon (unless specifically stated). Hand Weapons wielded by models on foot can be used alongside a Shield, then giving Parry
|
Hand Weapon
All models come equipped with a Hand Weapon as their default equipment. If a model has any Close Combat Weapon other than a Hand Weapon, it cannot choose to use the Hand Weapon (unless specifically stated). Hand Weapons wielded by models on foot can be used alongside a Shield, then giving Parry
|
|
Armatura Leggera
armatura +1
|
Light Armour
Armor +1
|
|
Coppia d'Armi
The wielder gains +1 Attack Value when using Paired Weapons. Attacks made with Paired Weapons gain +1 Offensive Skill and ignore Parry. A model using this weapon cannot simultaneously use a Shield against Melee Attacks.
|
Paired Weapons
The wielder gains +1 Attack Value when using Paired Weapons. Attacks made with Paired Weapons gain +1 Offensive Skill and ignore Parry. A model using this weapon cannot simultaneously use a Shield against Melee Attacks.
|
|
Attacco a Soffio
|
Breath Attack
|
|
Attacchi Divini
Successful Aegis saves taken against the attack must be rerolled.
|
Divine Attacks
Successful Aegis saves taken against the attack must be rerolled.
|
|
Attacchi Stritolanti
A model part with Grind Attacks resolves these attacks at its own Agility. It must choose an enemy unit in base
contact with it. The chosen enemy unit suffers a number of hits equal to the value stated in brackets (X). These hits
are resolved with the model part’s own Strength and Armour Penetration.
If a model has both Grind Attacks and Impact Hits
, it may only use one of these rules in the same Round of Combat
(its controlling player may choose which). When several model parts in the same unit have Grind Attacks and when
X is a random number (e.g. Grind Attacks (2D3)), roll for the number of hits separately for each model part.
|
Grind Attacks
A model part with Grind Attacks resolves these attacks at its own Agility. It must choose an enemy unit in base
contact with it. The chosen enemy unit suffers a number of hits equal to the value stated in brackets (X). These hits
are resolved with the model part’s own Strength and Armour Penetration.
If a model has both Grind Attacks and Impact Hits
, it may only use one of these rules in the same Round of Combat
(its controlling player may choose which). When several model parts in the same unit have Grind Attacks and when
X is a random number (e.g. Grind Attacks (2D3)), roll for the number of hits separately for each model part.
|
|
Attacchi di Calpestamento
|
Stomp Attacks
|
|
Scorta
|
Attached
|
|
Colpi d'Impatto
At Initiative Step 10, a charging model part with Impact Hits must choose an enemy unit that is in base contact with the attacking model's Front Facing. This unit suffers a number of hits equal to the value stated in brackets (X). These hits are resolved with the attacking model part's Strength and Armour Penetration.
If a model has both Grind Attacks and Impact Hits, it may only use one of these rules in the same Round of Combat (its controlling player may choose which). In multipart models, only model parts that also have Harnessed or Inanimate can use their Impact Hits. When several models in the same unit have Impact Hits, and when X is a random number (e.g. Impact Hits (D6)), roll for the number of hits separately for each model part.
|
Impact Hits
At Initiative Step 10, a charging model part with Impact Hits must choose an enemy unit that is in base contact with the attacking model's Front Facing. This unit suffers a number of hits equal to the value stated in brackets (X). These hits are resolved with the attacking model part's Strength and Armour Penetration.
If a model has both Grind Attacks and Impact Hits, it may only use one of these rules in the same Round of Combat (its controlling player may choose which). In multipart models, only model parts that also have Harnessed or Inanimate can use their Impact Hits. When several models in the same unit have Impact Hits, and when X is a random number (e.g. Impact Hits (D6)), roll for the number of hits separately for each model part.
|
|
Aura of Power
Units within 8″ of one or more friendly models with Aura of Power gain +2 Def and +2 Off. Model parts with Mount are not affected. The model can cast its chosen spell as a Bound Spell (5+).
|
Aura of Power
Units within 8″ of one or more friendly models with Aura of Power gain +2 Def and +2 Off. Model parts with Mount are not affected. The model can cast its chosen spell as a Bound Spell (5+).
|
|
Avanguardia
After Deployment (including units with Scout), models with Vanguard may perform a 12" move. The move is performed as an Advance Move in the Movement Phase, including any actions and restrictions the unit would normally have (such as Wheeling, Reforming, joining units, leaving units and so on). The 12" distance is used instead of the unit's Advance Rate and March Rate. This move cannot be used to move within 12" of enemy units. This is decreased to 6" for enemy units which have either Scouted or Vanguarded. Units that have moved in this way may not Declare Charges in the first Player Turn (if their side has the first turn). If both players have units with Vanguard, alternate moving units one at a time, starting with the player that finished deploying last. Instead of moving a unit, a player may declare to not move any more Vanguarding units.
|
Vanguard
After Deployment (including units with Scout), models with Vanguard may perform a 12" move. The move is performed as an Advance Move in the Movement Phase, including any actions and restrictions the unit would normally have (such as Wheeling, Reforming, joining units, leaving units and so on). The 12" distance is used instead of the unit's Advance Rate and March Rate. This move cannot be used to move within 12" of enemy units. This is decreased to 6" for enemy units which have either Scouted or Vanguarded. Units that have moved in this way may not Declare Charges in the first Player Turn (if their side has the first turn). If both players have units with Vanguard, alternate moving units one at a time, starting with the player that finished deploying last. Instead of moving a unit, a player may declare to not move any more Vanguarding units.
|
|
Beast
|
Beast
|
|
Beast Hunters
Attack Attribute – Shooting.
Attacks made with a Bow gain Lethal Strike (towards Height 5) and Zeal (towards Height 5).
|
Beast Hunters
Attack Attribute – Shooting.
Attacks made with a Bow gain Lethal Strike (towards Height 5) and Zeal (towards Height 5).
|
|
Beast Hunters
When using a Bow, the Shooting Attack gains [b]Lethal Strike (against Beast)[/b] and Shots 2.
|
Beast Hunters
When using a Bow, the Shooting Attack gains [b]Lethal Strike (against Beast)[/b] and Shots 2.
|
|
Blessings
The model's unit gains [b]Hatred[/b]. Model parts with Harnessed are not affected. The model can cast the following three Bound Spells with Power Level (4/8), Type: Caster's Unit and Augment, and Duration: One Turn. [b]Ullor's Blessing[/b] The target gains [b]Aegis (5+, against Melee Attacks)[/b]. [b]Sunna's Blessing[/b] The target gains [b]Flaming Attacks[/b]. All enemy units in base contact with one or more targets of this spell when the spell is cast suffer D6 hits with Strength 4, Armour Penetration 1, [b]Flaming Attacks[/b], and [b]Magical Attacks[/b]. [b]Volund's Blessing[/b] The target's failed to-wound rolls with Melee Attacks [b]must[/b] be rerolled.
|
Blessings
The model's unit gains [b]Hatred[/b]. Model parts with Harnessed are not affected. The model can cast the following three Bound Spells with Power Level (4/8), Type: Caster's Unit and Augment, and Duration: One Turn. [b]Ullor's Blessing[/b] The target gains [b]Aegis (5+, against Melee Attacks)[/b]. [b]Sunna's Blessing[/b] The target gains [b]Flaming Attacks[/b]. All enemy units in base contact with one or more targets of this spell when the spell is cast suffer D6 hits with Strength 4, Armour Penetration 1, [b]Flaming Attacks[/b], and [b]Magical Attacks[/b]. [b]Volund's Blessing[/b] The target's failed to-wound rolls with Melee Attacks [b]must[/b] be rerolled.
|
|
Bersaglio Difficile
|
Hard Target
|
|
Ferite Multiple
Attacks & Weapons, Melee
Unsaved wounds caused by the attacks are multiplied into the value given in brackets (X). If the value is a dice (e.g. Multiple Wounds (D3)), roll one dice for each unsaved wound with Multiple Wounds. The amount of wounds that the attack is multiplied into can never be higher than the Health Points Characteristic of the target (excluding Health Points lost previously in the battle). For example, if a Multiple Wounds (D6) attack wounds a unit of Trolls (HP 3) and rolls a '5' for the multiplier, the number of unsaved wounds is reduced to 3, even if the Troll unit has already lost one or two Health Points previously in battle.
If Clipped Wings is stated after the X value in brackets, any unsaved wound caused by the attack against a model with Fly is multiplied into X+1 instead of X.
|
Multiple Wounds
Attacks & Weapons, Melee
Unsaved wounds caused by the attacks are multiplied into the value given in brackets (X). If the value is a dice (e.g. Multiple Wounds (D3)), roll one dice for each unsaved wound with Multiple Wounds. The amount of wounds that the attack is multiplied into can never be higher than the Health Points Characteristic of the target (excluding Health Points lost previously in the battle). For example, if a Multiple Wounds (D6) attack wounds a unit of Trolls (HP 3) and rolls a '5' for the multiplier, the number of unsaved wounds is reduced to 3, even if the Troll unit has already lost one or two Health Points previously in battle.
If Clipped Wings is stated after the X value in brackets, any unsaved wound caused by the attack against a model with Fly is multiplied into X+1 instead of X.
|
|
Guardia del Corpo
When a Character is joined to a unit in which at least one model has Bodyguard, that Character gains Stubborn. When Characters or Character types are stated in brackets, Bodyguard only works for the specified Characters or Character types.
|
Bodyguard
When a Character is joined to a unit in which at least one model has Bodyguard, that Character gains Stubborn. When Characters or Character types are stated in brackets, Bodyguard only works for the specified Characters or Character types.
|
|
Scudo
+1 Armour Hand Weapons wielded by models on foot can be used alongside a Shield, then giving Parry.
|
Shield
+1 Armour Hand Weapons wielded by models on foot can be used alongside a Shield, then giving Parry.
|
|
Canalizzare
During step 3 of the Magic Phase Sequence, each of the Active Player's models with Channel may add X Veil Tokens to the owner's Veil Token Pool. This Universal Rule is cumulative, adding X Veil Tokens of each independent instance of Channel to the model's total Channel value (so e.g. a model with Channel (1) and Channel (2) is treated like a model with Channel (3)).
|
Channel
During step 3 of the Magic Phase Sequence, each of the Active Player's models with Channel may add X Veil Tokens to the owner's Veil Token Pool. This Universal Rule is cumulative, adding X Veil Tokens of each independent instance of Channel to the model's total Channel value (so e.g. a model with Channel (1) and Channel (2) is treated like a model with Channel (3)).
|
|
Carica Devastante
Attacks & Weapons, Melee
A charging model part with Devastating Charge, or using a weapon with Devastating Charge, gains the Model Rules
and Characteristic modifiers stated in brackets. For example, a charging model part with Devastating Charge (+1
Strength, Poison Attacks) gains +1 Strength and Poison Attacks when it is charging. This rule is cumulative: a model
part with several instances of Devastating Charge applies all Attack Attributes and Characteristics modifiers from all
of them when charging.
|
Devastating Charge
Attacks & Weapons, Melee
A charging model part with Devastating Charge, or using a weapon with Devastating Charge, gains the Model Rules
and Characteristic modifiers stated in brackets. For example, a charging model part with Devastating Charge (+1
Strength, Poison Attacks) gains +1 Strength and Poison Attacks when it is charging. This rule is cumulative: a model
part with several instances of Devastating Charge applies all Attack Attributes and Characteristics modifiers from all
of them when charging.
|
|
Colpo Letale
If the attack wounds with a natural to-wound roll of 6+, its Armour Penetration is set to 10 and the target of the
attack cannot take a Regeneration save against it.
|
Lethal Strike
If the attack wounds with a natural to-wound roll of 6+, its Armour Penetration is set to 10 and the target of the
attack cannot take a Regeneration save against it.
|
|
Combattere su Rango Extra
|
Fight in Extra Rank
|
|
Construct
|
Construct
|
|
Impassibile
If more than half of a unit's models are Fearless, the unit automatically passes Panic Tests and Decimated Tests and cannot declare a Flee Charge Reaction (unless already Fleeing). Models that are Fearless are also immune to the effects of Fear.
|
Fearless
If more than half of a unit's models are Fearless, the unit automatically passes Panic Tests and Decimated Tests and cannot declare a Flee Charge Reaction (unless already Fleeing). Models that are Fearless are also immune to the effects of Fear.
|
|
Falcata Rapida
When a unit composed entirely of models with Swiftstride rolls Charge Range, Flee Distance, Pursuit Distance or Overrun Distance, it rolls an additional D6 (normally this will lead to rolling 3D6) and discards the lowest D6 rolled.
|
Swiftstride
When a unit composed entirely of models with Swiftstride rolls Charge Range, Flee Distance, Pursuit Distance or Overrun Distance, it rolls an additional D6 (normally this will lead to rolling 3D6) and discards the lowest D6 rolled.
|
|
Steam Powered
The model may choose not to move despite having Random Movement, and its Pursuit and Overrun Distance in the Melee Phase are [b]always[/b] 0". Before moving in the Movement Phase, the model may choose to replace its Random Movement (4D3") with [b]Random Movement (5D3")[/b] until the end of the Movement Phase. If so, the Steam Cannon cannot be used during this Player Turn.
|
Steam Powered
The model may choose not to move despite having Random Movement, and its Pursuit and Overrun Distance in the Melee Phase are [b]always[/b] 0". Before moving in the Movement Phase, the model may choose to replace its Random Movement (4D3") with [b]Random Movement (5D3")[/b] until the end of the Movement Phase. If so, the Steam Cannon cannot be used during this Player Turn.
|
|
Determinato
A unit with at least one model with Stubborn ignores any Combat Score penalties to its Discipline when taking Break Tests or Combat Reform Discipline Tests.
|
Stubborn
A unit with at least one model with Stubborn ignores any Combat Score penalties to its Discipline when taking Break Tests or Combat Reform Discipline Tests.
|
|
Disciplined
|
Disciplined
|
|
Dying Blow
|
Dying Blow
|
|
Emplacement
|
Emplacement
|
|
Ingegnere
Once per Shooting Phase, an unengaged Engineer may select a single War Machine within 6″ that has not fired yet to gain the following effects:
- Replace the Aim of one of the War Machine's Artillery Weapons with the value given in brackets (X+).
- You may reroll the roll on the Misfire Table.
- You may reroll the dice (all of them or none) for determining the number of hits of a Flamethrower Artillery Weapon.
|
Engineer
Once per Shooting Phase, an unengaged Engineer may select a single War Machine within 6″ that has not fired yet to gain the following effects:
- Replace the Aim of one of the War Machine's Artillery Weapons with the value given in brackets (X+).
- You may reroll the roll on the Misfire Table.
- You may reroll the dice (all of them or none) for determining the number of hits of a Flamethrower Artillery Weapon.
|
|
Terrore
The model gains Fear and is immune to the effects of Terror. When a unit with one or more models with Terror Declares a Charge, its target must take a Panic Test. If the test is failed, the target of the charge must declare a Flee Charge Reaction, if able to do so.
|
Terror
The model gains Fear and is immune to the effects of Terror. When a unit with one or more models with Terror Declares a Charge, its target must take a Panic Test. If the test is failed, the target of the charge must declare a Flee Charge Reaction, if able to do so.
|
|
First Knight
When the model is joined to a unit of Knightly Orders, the unit gains [b]Fearless[/b], and if the model is the General, the R&F models in the unit also gain [b]Parent Unit[/b].
|
First Knight
When the model is joined to a unit of Knightly Orders, the unit gains [b]Fearless[/b], and if the model is the General, the R&F models in the unit also gain [b]Parent Unit[/b].
|
|
Esclusivo
|
Exclusive
|
|
Fuga Simulata
A unit consisting solely of models with Feigned Flight that voluntarily chooses to Flee as a Charge Reaction, and subsequently passes a Rally Test in its next Player Turn, doesn't become Shaken. Furthermore, the Reform that is made after Rallying in this case doesn't prevent the unit from moving nor from shooting (but it still counts as having moved for shooting purposes). This rule cannot be applied if a unit fails to rally on the next friendly Player Turn or involuntarily Flees, such as a result of a failed Panic Test or if it was already Fleeing when being charged.
|
Feigned Flight
A unit consisting solely of models with Feigned Flight that voluntarily chooses to Flee as a Charge Reaction, and subsequently passes a Rally Test in its next Player Turn, doesn't become Shaken. Furthermore, the Reform that is made after Rallying in this case doesn't prevent the unit from moving nor from shooting (but it still counts as having moved for shooting purposes). This rule cannot be applied if a unit fails to rally on the next friendly Player Turn or involuntarily Flees, such as a result of a failed Panic Test or if it was already Fleeing when being charged.
|
|
First Strike
|
First Strike
|
|
Volo
The model gains Light Troops and Swiftstride. Units composed entirely of models with Fly may make Flying Movements when performing a Move Chargers move, an Advance Move, or a March Move. When a unit makes a Flying Movement, substitute its models' Advance Rate with the first value given in brackets (X), and their March Rate with the second value given in brackets (Y). All modifiers to ground movement values are also applied to the flying values of a model. Units using Flying Movement ignore all Terrain Features and units during the Flying Movement (from their starting to their ending position), but must abide by the Unit Spacing rule at the end of the move (unless charging, when the normal exceptions to the Unit Spacing rule apply). They are still affected by the effects of the Terrain Features from which they take off and in which they land.
|
Fly
The model gains Light Troops and Swiftstride. Units composed entirely of models with Fly may make Flying Movements when performing a Move Chargers move, an Advance Move, or a March Move. When a unit makes a Flying Movement, substitute its models' Advance Rate with the first value given in brackets (X), and their March Rate with the second value given in brackets (Y). All modifiers to ground movement values are also applied to the flying values of a model. Units using Flying Movement ignore all Terrain Features and units during the Flying Movement (from their starting to their ending position), but must abide by the Unit Spacing rule at the end of the move (unless charging, when the normal exceptions to the Unit Spacing rule apply). They are still affected by the effects of the Terrain Features from which they take off and in which they land.
|
|
Furia
At the start of the Charge Phase, each of your nonFleeing units with at least one model with Frenzy that is unengaged, does not contain any Shaken models, and has an enemy unit inside its Front Arc within the unit’s Advance Rate +7″ must take a Discipline Test, called a Frenzy Test. If the test is failed, the whole unit must declare a Charge this Player Turn if possible.
Frenzy Tests and Restrain Pursuit Tests taken by units with at least one model with Frenzy are subject to Maximised Roll.
If there are different Advance Rates available in the unit, the Advance Rate used for the Frenzy Test and for the Charge Range is determined as follows:
• If a model has more than one Advance Rate (e.g. due to Fly), the model must use the Advance Rate that has the highest chance of completing the Charge.
• If a unit contains models with different Advance Rates, the unit must use the highest Advance Rate that all models in the unit can use (which will usually be the lowest Advance Rate in the unit).
For example, a model with Advance Rate 2″ and Fly (8″, 16″) must use the Advance Rate from Fly. And if a Character in a Combined Unit has Advance Rate 4″ while the R&F models have 6″, the Combined Unit must use Advance Rate 4″. Note that when a unit is forced to declare a Charge due to a failed Frenzy Test, it is not forced to Charge the enemy unit that triggered the Frenzy Test.
|
Frenzy
At the start of the Charge Phase, each of your nonFleeing units with at least one model with Frenzy that is unengaged, does not contain any Shaken models, and has an enemy unit inside its Front Arc within the unit’s Advance Rate +7″ must take a Discipline Test, called a Frenzy Test. If the test is failed, the whole unit must declare a Charge this Player Turn if possible.
Frenzy Tests and Restrain Pursuit Tests taken by units with at least one model with Frenzy are subject to Maximised Roll.
If there are different Advance Rates available in the unit, the Advance Rate used for the Frenzy Test and for the Charge Range is determined as follows:
• If a model has more than one Advance Rate (e.g. due to Fly), the model must use the Advance Rate that has the highest chance of completing the Charge.
• If a unit contains models with different Advance Rates, the unit must use the highest Advance Rate that all models in the unit can use (which will usually be the lowest Advance Rate in the unit).
For example, a model with Advance Rate 2″ and Fly (8″, 16″) must use the Advance Rate from Fly. And if a Character in a Combined Unit has Advance Rate 4″ while the R&F models have 6″, the Combined Unit must use Advance Rate 4″. Note that when a unit is forced to declare a Charge due to a failed Frenzy Test, it is not forced to Charge the enemy unit that triggered the Frenzy Test.
|
|
Fury
|
Fury
|
|
Giant See, Giant Do
Universal Rule.
The model gains Support Unit.
|
Giant See, Giant Do
Universal Rule.
The model gains Support Unit.
|
|
Parent Unit
A unit is considered a Parent Unit if at least half of its models have this Universal Rule. Parent Units treat all Support Units as [b]Insignificant[/b]. Immediately after a Parent Unit passes a Charge Range roll against a non-Fleeing enemy unit in the Charge Phase, before performing the Charge Move, any Support Units within 8" of the Parent Unit may perform a Support Charge. To do so, the whole Support Unit declares a Charge against the same enemy unit. Apply all of the usual rules for Charging for this out-of-sequence Charge (such as Line of Sight, Front Arc, must roll for Charge Range, max. one Wheel, etc.), with the exception that the enemy cannot choose a Charge Reaction other than Hold. For the purpose of Charge Moves, treat this as any other case of Combined Charges. When calculating Combat Scores in the following Melee Phase, combine the Rank Bonus of both the Parent Unit and up to one Support Unit that performed a successful Support Charge (following all normal restrictions), up to a maximum of +6.
|
Parent Unit
A unit is considered a Parent Unit if at least half of its models have this Universal Rule. Parent Units treat all Support Units as [b]Insignificant[/b]. Immediately after a Parent Unit passes a Charge Range roll against a non-Fleeing enemy unit in the Charge Phase, before performing the Charge Move, any Support Units within 8" of the Parent Unit may perform a Support Charge. To do so, the whole Support Unit declares a Charge against the same enemy unit. Apply all of the usual rules for Charging for this out-of-sequence Charge (such as Line of Sight, Front Arc, must roll for Charge Range, max. one Wheel, etc.), with the exception that the enemy cannot choose a Charge Reaction other than Hold. For the purpose of Charge Moves, treat this as any other case of Combined Charges. When calculating Combat Scores in the following Melee Phase, combine the Rank Bonus of both the Parent Unit and up to one Support Unit that performed a successful Support Charge (following all normal restrictions), up to a maximum of +6.
|
|
Holy Relic
Friendly units within 6" of the model gain [b]Hatred[/b]. Model parts with Harnessed are not affected. For Bound Spells from Blessings cast by the rider, Type: Caster's Unit is replaced with Type: 6" Aura. The model can cast Unerring Strike (Divination) as a Bound Spell with Power Level (4/8).
|
Holy Relic
Friendly units within 6" of the model gain [b]Hatred[/b]. Model parts with Harnessed are not affected. For Bound Spells from Blessings cast by the rider, Type: Caster's Unit is replaced with Type: 6" Aura. The model can cast Unerring Strike (Divination) as a Bound Spell with Power Level (4/8).
|
|
Schermagliatore
The model can draw Lines of Sight in any direction (i.e. it is not limited by the Front Arc) from any point on its base (remember that Charge Moves are limited by a single Wheel of no more than 90°, and that Stand and Shoot Charge Reactions can only be done against enemies in the Front Arc) and can always use Shooting Attacks from any rank (they are not limited to shooting from first and second rank).
Units with at least one R&F model with Skirmisher are formed into a skirmish formation. They are not placed in base to base contact with each other. Instead, models are placed with a 12.5 mm distance between them. This gap is considered part of the unit for Cover purposes, and will have the same Size as the models in the unit. Other than this gap between models, units with Skirmisher follow the normal rules for forming units and therefore have a Front, two Flanks, a Rear, can perform Supporting Attacks, and so on. Units in skirmish formation gain Hard Target and Light Troops, never block Line of Sight, and when units in skirmish formation would contribute to Hard Cover, they contribute to Soft Cover instead.
|
Skirmisher
The model can draw Lines of Sight in any direction (i.e. it is not limited by the Front Arc) from any point on its base (remember that Charge Moves are limited by a single Wheel of no more than 90°, and that Stand and Shoot Charge Reactions can only be done against enemies in the Front Arc) and can always use Shooting Attacks from any rank (they are not limited to shooting from first and second rank).
Units with at least one R&F model with Skirmisher are formed into a skirmish formation. They are not placed in base to base contact with each other. Instead, models are placed with a 12.5 mm distance between them. This gap is considered part of the unit for Cover purposes, and will have the same Size as the models in the unit. Other than this gap between models, units with Skirmisher follow the normal rules for forming units and therefore have a Front, two Flanks, a Rear, can perform Supporting Attacks, and so on. Units in skirmish formation gain Hard Target and Light Troops, never block Line of Sight, and when units in skirmish formation would contribute to Hard Cover, they contribute to Soft Cover instead.
|
|
Human
|
Human
|
|
Instabile
|
Unstable
|
|
Non un Capo
The model cannot be the General.
|
Not a Hero
|
|
Truppe Leggere
Units composed entirely of models with Light Troops are allowed to make any number of Reforms when performing Advance Moves or March Moves. They are allowed to shoot even if they Marched or Reformed. No model can end its movement with its centre further away than its March Rate from its starting position, around any obstructions (including the Unit Spacing rule). This means that when checking the distance travelled by a model, check the path the model would have taken if it was alone, with the exception that the unit as a whole cannot break the Unit Spacing rule while performing the move. If a model performed any action during the movement (such as a Sweeping Attack), the distance moved is counted from its starting position to the point on the Battlefield where it performed that action and then to its final position.
If more than half the models in a unit have Light Troops, the unit always counts as having 0 Full Ranks. Characters with Light Troops that are joined to units with one or more models without Light Troops, lose this rule for as long as they remain with the unit. An Infantry Character joined to an Infantry unit with both Light Troops and the same Size as the Character gains Light Troops for as long as it remains with the unit.
|
Light Troops
Units composed entirely of models with Light Troops are allowed to make any number of Reforms when performing Advance Moves or March Moves. They are allowed to shoot even if they Marched or Reformed. No model can end its movement with its centre further away than its March Rate from its starting position, around any obstructions (including the Unit Spacing rule). This means that when checking the distance travelled by a model, check the path the model would have taken if it was alone, with the exception that the unit as a whole cannot break the Unit Spacing rule while performing the move. If a model performed any action during the movement (such as a Sweeping Attack), the distance moved is counted from its starting position to the point on the Battlefield where it performed that action and then to its final position.
If more than half the models in a unit have Light Troops, the unit always counts as having 0 Full Ranks. Characters with Light Troops that are joined to units with one or more models without Light Troops, lose this rule for as long as they remain with the unit. An Infantry Character joined to an Infantry unit with both Light Troops and the same Size as the Character gains Light Troops for as long as it remains with the unit.
|
|
Master Artificer
The Master Artificer may give the Order [b]Ready! Aim! Fire![/b] to a Parent Unit or Support Unit it has joined.
|
Master Artificer
The Master Artificer may give the Order [b]Ready! Aim! Fire![/b] to a Parent Unit or Support Unit it has joined.
|
|
Meeting Of Minds
Universal Rule.
The model may give two Orders per turn instead of one.
|
Meeting Of Minds
Universal Rule.
The model may give two Orders per turn instead of one.
|
|
Metal Armour
|
Metal Armour
|
|
Mount
|
Mount
|
|
Movimento Casuale
The unit cannot Declare Charges and cannot move normally (Advance, March, Reform) in the Movement Phase (which also means they cannot perform Magical Moves). The model loses Swiftstride (and can never gain it), but always charges, Flees, Pursues and Overruns the distance stated in brackets.
In the Movement Phase, at the end of step 2 of the the it with Random Movement moves using the rules for Pursuing units, except that they can freely choose which direction to rotate towards before rolling the Pursuit Distance, cannot move off the Board Edge and only take Dangerous Terrain Tests if they actually charge an enemy unit (they still test as normal when Fleeing, Pursuing a Broken enemy or Overrunning).
Whenever a unit with Random Movement needs a March Rate (e.g. when Post-Combat Reforming), use the potential maximum value of X as its March Rate.
Characters with Random Movement can only join units with Random Movement (by moving into contact with them during the Movement Phase or by being deployed inside), and units with Random Movement can only be joined by Characters with Random Movement. Units with Random Movement cannot enter Buildings. If a unit has several sets of Random Movement, use the one with the lowest average (in case of a tie, you may choose which version to use). A model with Random Movement cannot move in the same phase as it arrives on the Battlefield as Reinforcement (Dawn Assault) or Ambusher.
|
Random Movement
The unit cannot Declare Charges and cannot move normally (Advance, March, Reform) in the Movement Phase (which also means they cannot perform Magical Moves). The model loses Swiftstride (and can never gain it), but always charges, Flees, Pursues and Overruns the distance stated in brackets.
In the Movement Phase, at the end of step 2 of the the it with Random Movement moves using the rules for Pursuing units, except that they can freely choose which direction to rotate towards before rolling the Pursuit Distance, cannot move off the Board Edge and only take Dangerous Terrain Tests if they actually charge an enemy unit (they still test as normal when Fleeing, Pursuing a Broken enemy or Overrunning).
Whenever a unit with Random Movement needs a March Rate (e.g. when Post-Combat Reforming), use the potential maximum value of X as its March Rate.
Characters with Random Movement can only join units with Random Movement (by moving into contact with them during the Movement Phase or by being deployed inside), and units with Random Movement can only be joined by Characters with Random Movement. Units with Random Movement cannot enter Buildings. If a unit has several sets of Random Movement, use the one with the lowest average (in case of a tie, you may choose which version to use). A model with Random Movement cannot move in the same phase as it arrives on the Battlefield as Reinforcement (Dawn Assault) or Ambusher.
|
|
Pistola
Range 12" Shots 1 Strength 4 Armour Penetration 2 QuicktoFire
|
Pistol
Range 12" Shots 1 Strength 4 Armour Penetration 2 QuicktoFire
|
|
Rage
Attack Attribute – Close Combat.
Whenever the model loses a Health Point, it gains +1 Attack Value. Whenever it gains a Health Point, it suffers −1 Attack Value.
|
Rage
Attack Attribute – Close Combat.
Whenever the model loses a Health Point, it gains +1 Attack Value. Whenever it gains a Health Point, it suffers −1 Attack Value.
|
|
Reserves
The unit is treated as [b]Insignificant[/b] by Parent and Support Units.
|
Reserves
The unit is treated as [b]Insignificant[/b] by Parent and Support Units.
|
|
Resistance
|
Resistance
|
|
Shoot in Extra Rank
|
Shoot in Extra Rank
|
|
Steam Cannon
Name Aim Range Shots Str AP Attack Attributes
Steam Cannon 3+ 36″ 1 5 2 Area Attack (1×5), Artillery, Direct Hit (D3+1), Unwieldy (1)
|
Steam Cannon
Name Aim Range Shots Str AP Attack Attributes
Steam Cannon 3+ 36″ 1 5 2 Area Attack (1×5), Artillery, Direct Hit (D3+1), Unwieldy (1)
|
|
Support Unit
A unit is considered a Support Unit if at least half of its models have this Universal Rule. Support Units are treated as [b]Insignificant[/b] by Parent Units. Support Units within 8" of at least one Parent Unit gain [b]Fight in Extra Rank[/b] and may use Shooting Attacks from the third rank (in addition to the first and second). If the Support Unit has at least one Full Rank, it counts as having the same number of Full Ranks as a Parent Unit within 8" for the purpose of being Steadfast if it has fewer Full Ranks than the Parent Unit. During the opponent's Charge Phase, Support Units may perform one of the following actions: 1. Immediately after an unengaged Parent Unit within 8" declares a Charge Reaction other than a mandatory Flee Charge Reaction, the Support Unit may Stand and Shoot as if the enemy had declared a Charge against them in their current position (apply the normal rules for the Stand and Shoot Charge Reaction). 2. Immediately after all enemy units have completed their Charge Moves, Support Units within 8" of any Parent Unit that was successfully Charged in this phase may Counter Charge. To do so, choose one enemy unit that successfully Charged the Parent Unit and declare a Charge with the whole Support Unit. Apply all the usual rules for Charging for this out-of-sequence Charge (such as Line of Sight, Front Arc, must roll for Charge Range, max. one Wheel, etc.). When calculating Combat Scores in the following Melee Phase, combine the Rank Bonus of both the Parent Unit and up to one Support Unit that performed a successful Counter Charge (following all normal restrictions), up to a maximum of +6.
|
Support Unit
A unit is considered a Support Unit if at least half of its models have this Universal Rule. Support Units are treated as [b]Insignificant[/b] by Parent Units. Support Units within 8" of at least one Parent Unit gain [b]Fight in Extra Rank[/b] and may use Shooting Attacks from the third rank (in addition to the first and second). If the Support Unit has at least one Full Rank, it counts as having the same number of Full Ranks as a Parent Unit within 8" for the purpose of being Steadfast if it has fewer Full Ranks than the Parent Unit. During the opponent's Charge Phase, Support Units may perform one of the following actions: 1. Immediately after an unengaged Parent Unit within 8" declares a Charge Reaction other than a mandatory Flee Charge Reaction, the Support Unit may Stand and Shoot as if the enemy had declared a Charge against them in their current position (apply the normal rules for the Stand and Shoot Charge Reaction). 2. Immediately after all enemy units have completed their Charge Moves, Support Units within 8" of any Parent Unit that was successfully Charged in this phase may Counter Charge. To do so, choose one enemy unit that successfully Charged the Parent Unit and declare a Charge with the whole Support Unit. Apply all the usual rules for Charging for this out-of-sequence Charge (such as Line of Sight, Front Arc, must roll for Charge Range, max. one Wheel, etc.). When calculating Combat Scores in the following Melee Phase, combine the Rank Bonus of both the Parent Unit and up to one Support Unit that performed a successful Counter Charge (following all normal restrictions), up to a maximum of +6.
|
|
Unruly
|
Unruly
|
Magic Items usable by the army
| IT | EN |
|---|---|
|
Blacksteel
Immune (Flaming Attacks, Lightning Attacks).
+1 Arm.
If the wearer is on foot, it gains an additional +1 Arm.
|
Blacksteel
Immune (Flaming Attacks, Lightning Attacks).
+1 Arm.
If the wearer is on foot, it gains an additional +1 Arm.
|
|
Destiny's Call
Aegis (4+), and the wearer’s model’s Arm is set to always 3.
Note that this means it cannot be improved beyond 3. It is still affected by AP.
|
Destiny's Call
Aegis (4+), and the wearer’s model’s Arm is set to always 3.
Note that this means it cannot be improved beyond 3. It is still affected by AP.
|
|
Arcane Volcanist
Whenever you draw a Flux Card, apply the effects from the list below based on the number of the Flux Card. Effects have Duration: One Turn.
Card Number Effects applied to all models on the Battlefield
1, 5, 9, 13 Sulfurous Gas: All Terrain Features gain Dangerous Terrain.
2, 6, 10, 14 Ash Cloud: −1 to hit with Shooting Attacks.
3, 7, 11, 15 Obsidian Deposits: −1 to Casting Rolls.
4, 8, 12, 16 Ominous Rumbling: −1 Cou.
|
Arcane Volcanist
Whenever you draw a Flux Card, apply the effects from the list below based on the number of the Flux Card. Effects have Duration: One Turn.
Card Number Effects applied to all models on the Battlefield
1, 5, 9, 13 Sulfurous Gas: All Terrain Features gain Dangerous Terrain.
2, 6, 10, 14 Ash Cloud: −1 to hit with Shooting Attacks.
3, 7, 11, 15 Obsidian Deposits: −1 to Casting Rolls.
4, 8, 12, 16 Ominous Rumbling: −1 Cou.
|
|
Death Warrant
+X Att, +X Str, and +X AP, where “X” is the number of friendly Parent Units and Support Units of Height 1 (including the bearer’s unit if applicable) Engaged in the same Combat as the wielder.
|
Death Warrant
+X Att, +X Str, and +X AP, where “X” is the number of friendly Parent Units and Support Units of Height 1 (including the bearer’s unit if applicable) Engaged in the same Combat as the wielder.
|
|
Infusione di basalto
The wearer gains +1 Armour and Aegis (3+, against Flaming Attacks). The wearer automatically fails all Fortitude Saves.
|
Basalt Infusion
+1 Arm, Aegis (3+, against Flaming Attacks), and the wearer automatically fails all Fortitude Saves.
|
|
Battleline Hero
The range of the model’s Commanding Presence is increased to 18″.
|
Battleline Hero
The range of the model’s Commanding Presence is increased to 18″.
|
|
Pergamena vincolante
One use only. May be activated after Siphon the Veil (at the end of step 3 of the Magic Phase Sequence).
When activated, pick an enemy model and select one of its Attribute, Bound, or Learned Spells. The selected model cannot cast the chosen instance of the spell during this Magic Phase. Only a single Binding Scroll may be activated during the same phase.
|
Binding Scroll
May be activated at the end of Siphon the Veil during the enemy Magic Phase. When activated, pick an enemy model and select one of its spells, including Bound Spells.
The selected model cannot cast the chosen instance of the spell during this Magic Phase. Only a single Binding Scroll may be activated during the same phase.
|
|
Shield of Volund
Immune (Fury, Lethal Strike).
|
Shield of Volund
Immune (Fury, Lethal Strike).
|
|
Winter Cloak
The bearer gains Aegis (3+, against Flaming Attacks), Aegis (5+), and Distracting (1). The bearer automatically fails all Fortitude Saves.
|
Winter Cloak
The bearer gains Aegis (3+, against Flaming Attacks), Aegis (5+), and Distracting (1). The bearer automatically fails all Fortitude Saves.
|
|
Monile portafortuna
One use only. May be activated when the bearer’s model fails an Armour Save. This failed Armour Save may be rerolled.
|
Mimic Cloak
Stand Behind
|
|
Cimelio magico
The bearer gains the Hereditary Spell during Spell Selection, always knows it in addition to its other spells, cannot select it during Spell Selection, andcannot replace or otherwise lose it.
|
Magical Heirloom
The bearer knows the Hereditary Spell of its Army Book in addition to its other spells, cannot select it during Spell Selection, and cannot replace or otherwise lose it.
|
|
Hero's Heart
+1 Att, and always at least Str 5 and AP 2.
|
Hero's Heart
+1 Att, and always at least Str 5 and AP 2.
|
|
Corona del re mago
During Spell Selection, randomise a Magic Path (from all Paths in this book). The bearer is a Wizard Apprentice using the randomised Path. It cannot select the Hereditary Spell. The bearer cannot take any Special Items nor any other upgrades that are restricted to Wizards (or any types of Wizards).
|
Crown of the Wizard King
During Spell Selection, randomise a Magic Path (from all Paths in this book). The bearer is a Wizard Apprentice using the randomised Path. It cannot select the Hereditary Spell. The bearer cannot take any Special Items nor any other upgrades that are restricted to Wizards (or any types of Wizards).
|
|
Vespertino (Scudo)
The bearer may choose to reroll its failed Armour Saves while using this Shield. If the reroll from Dusk Forged is failed, the bearer automatically fails any Special Save against that wound.
|
Dusk Forged
The bearer must reroll its failed Armour Saves. The bearer automatically fails any Special Save, regardless if using the Shield or not.
|
|
Curse Of Lycanthropy
One use only. You may activate this ability when Choosing Equipment and Abilities. Set the model part’s Att to 4, Str to 5, and AP to 3. The model part gains Fortitude (4+). The model cannot use any weapons while this ability is active. Duration: One Turn.
|
Curse Of Lycanthropy
One use only. You may activate this ability when Choosing Equipment and Abilities. Set the model part’s Att to 4, Str to 5, and AP to 3. The model part gains Fortitude (4+). The model cannot use any weapons while this ability is active. Duration: One Turn.
|
|
The Light of Sonnstahl
AP 10. Wounds automatically.
|
The Light of Sonnstahl
AP 10. Wounds automatically.
|
|
Dragon’s Brew
Breath Attack (Str 4, AP 1, Flaming Attacks, Stand and Shoot).
|
Dragon’s Brew
Breath Attack (Str 4, AP 1, Flaming Attacks, Stand and Shoot).
|
|
Elixir of Negation
Aegis (3+, against Magical Attacks).
|
Elixir of Negation
Aegis (3+, against Magical Attacks).
|
|
Essenza di una mente libera
The bearer may choose up to two Paths on the Army List instead of one (from the ones normally available to it). During Spell Selection, choose which one of the two Paths to use. The bearer cannot select from the Learned Spells 5 and 6 of its chosen Path.
|
Essence of a Free Mind
The bearer may choose up to two Paths on the Army List instead of one (from the ones normally available to it).
Select spells for both Paths on the Army List as normal.
During Spell Selection, choose which one of the two Paths to use. The bearer cannot select Master Spells.
|
|
Exemplar's Flame
The bearer can cast Living Steel (Alchemy) as a Bound Spell (5+).
|
Exemplar's Flame
The bearer can cast Living Steel (Alchemy) as a Bound Spell (5+).
|
|
Ghostly Guard
+2 Arm against non-Magical Attacks.
|
Ghostly Guard
+2 Arm against non-Magical Attacks.
|
|
Giant Slayer
Crush Attack. This Crush Attack always hits on 4+.
|
Giant Slayer
Crush Attack. This Crush Attack always hits on 4+.
|
|
Hammer of Witches
Att is set to 5. Fury (towards Channel (X)).
|
Hammer of Witches
Att is set to 5. Fury (towards Channel (X)).
|
|
Witchfire Guard
Aegis (4+, against Magical Attacks).
|
Witchfire Guard
Aegis (4+, against Magical Attacks).
|
|
Imperial Seal
Arm is set to 6. +1 Cou. The wearer’s unit cannot voluntarily declare Flee! as a Charge Reaction.
|
Imperial Seal
Arm is set to 6. +1 Cou. The wearer’s unit cannot voluntarily declare Flee! as a Charge Reaction.
|
|
Innovative Leader
An army with an Innovative Leader may use different Base Sizes than those
listed in the Unit Entries. Any Unit Entry using this option must have the new
base size noted on the Army List, and all models in the unit must have the same
Base Size. The new bases must:
• Be between 100% – 125% of the original width.
• Be between 100% – 150% of the original depth.
• Both width and depth must be divisible by 5 mm.
|
Innovative Leader
An army with an Innovative Leader may use different Base Sizes than those
listed in the Unit Entries. Any Unit Entry using this option must have the new
base size noted on the Army List, and all models in the unit must have the same
Base Size. The new bases must:
• Be between 100% – 125% of the original width.
• Be between 100% – 150% of the original depth.
• Both width and depth must be divisible by 5 mm.
|
|
Sterminatrice di re
The wielder gains +X Attack Value while using this weapon, and attacks made with this weapon gain +X Strength, +X Armour Penetration, and Magical Attacks, where X is equal to the number of enemy Characters in base contact with the wielder’s unit. This bonus is calculated at the Initiative Step when the attacks are made.
|
King Slayer
Attached. While there is an enemy Character in contact with the wielder’s unit: +1 Att, +2 Str, and +2 AP
|
|
Locket of Sunna
In a Duel, choose one model part without neither Construct nor Mount that the bearer is fighting with. The bearer and the chosen model part must swap their corresponding Characteristic values of Att, Str, AP, and Agi, and their models swap their Res values. This is done before applying other modifiers.
|
Locket of Sunna
In a Duel, choose one model part without neither Construct nor Mount that the bearer is fighting with. The bearer and the chosen model part must swap their corresponding Characteristic values of Att, Str, AP, and Agi, and their models swap their Res values. This is done before applying other modifiers.
|
|
Luce purificante
At the start of each Round of Combat, the wielder may choose to have attacks made with this weapon become Flaming Attacks and Magical Attacks.
|
Vorpal Binding
Successful Armour Saves and Special Saves against attacks made with this weapon have to be rerolled.
|
|
Mantle of Ullor
Enemy units within 8″ of the bearer lose the Charging Momentum Agi bonus and +1 Combat Score from Charging.
|
Mantle of Ullor
Enemy units within 8″ of the bearer lose the Charging Momentum Agi bonus and +1 Combat Score from Charging.
|
|
Pozione della rapidit
One use only. May be activated at the start of any Round of Combat. Until the end of the Player Turn, the bearer gains +3 Agility.
|
Potion of Swiftness
+3 Agi.
|
|
Scroll of Conquest
Friendly units within 6″ of the bearer must reroll failed Charge Range rolls.
|
Scroll of Conquest
Friendly units within 6″ of the bearer must reroll failed Charge Range rolls.
|
|
Scroll of Power
May be activated when the bearer fails a Casting Roll or when you fail a Dispelling Roll, by removing 1 Magic Dice from your pool. Reroll all Magic Dice used for the Casting or Dispelling Roll.
|
Scroll of Power
May be activated when the bearer fails a Casting Roll or when you fail a Dispelling Roll, by removing 1 Magic Dice from your pool. Reroll all Magic Dice used for the Casting or Dispelling Roll.
|
|
Sigil of Protection
+1 Arm.
|
Sigil of Protection
+1 Arm.
|
|
Spell Scroll (Flaming Swords)
May be activated at any time during your Magic Phase.
The bearer knows the spell indicated in brackets (X), in addition to its other spells. If the bearer already knows the spell, this has no effect.
|
Spell Scroll (Flaming Swords)
May be activated at any time during your Magic Phase.
The bearer knows the spell indicated in brackets (X), in addition to its other spells. If the bearer already knows the spell, this has no effect.
|
|
Talismano di protezione
The bearer gains Aegis (5+).
|
Talisman of Shielding
Aegis (5+).
|
|
Talismano del vuoto
The bearer gains Channel (1).
|
Talisman of the Void
Channel (1). This item can only be used if the model’s army total combined Channel is 3 or less (excluding Channel from this Magic Item).
|
|
Tocco di grandigia
Attacks made with this weapon gain +1 Strength, +1 Armour Penetration, and become Magical Attacks.
Strength modifiers from this weapon (combining both mundane and Weapon Enchantment modifiers) cannot exceed +2 (but can exceed +2 through modifiers from other sources, such as spells).
|
Touch of Greatness
+1 Str and +1 AP.
|
|
Troll Tonic
Fortitude (5+).
|
Troll Tonic
Fortitude (5+).
|
|
Trusted Adviser
When determining the Secondary Objective, randomize two objectives instead of one, and choose which of the two objectives to play.
|
Trusted Adviser
When determining the Secondary Objective, randomize two objectives instead of one, and choose which of the two objectives to play.
|
|
Warding of Unity
Attached and Resistance (Melee Attacks).
|
Warding of Unity
Attached and Resistance (Melee Attacks).
|
|
Wild Warding
+3 Arm. The Armour Value can never be improved beyond 5.
|
Wild Warding
+3 Arm. The Armour Value can never be improved beyond 5.
|
Magic Standards usable by the army
| IT | EN |
|---|---|
|
Aether Icon
The bearer’s unit gains Magic Resistance (1).
|
Aether Icon
The bearer’s unit gains Magic Resistance (1).
|
|
Banner of Unity
Whenever the bearer's unit is targeted by an Order, it may immediately give an Order to a single Support Unit within 8" of the bearer's unit.
|
Banner of Unity
Whenever the bearer's unit is targeted by an Order, it may immediately give an Order to a single Support Unit within 8" of the bearer's unit.
|
|
Banner Of Recruitment
The bearer’s unit gains Exclusive and changes its Maximum Points Cost to max 800 points.
|
Banner Of Recruitment
The bearer’s unit gains Exclusive and changes its Maximum Points Cost to max 800 points.
|
|
Distortion Emblem
One use only. May be activated at the start of any Phase.
The bearer’s unit gains Hard Target (2) until the end of the Player Turn.
|
Distortion Emblem
One use only. May be activated at the start of any Phase.
The bearer’s unit gains Hard Target (2) until the end of the Player Turn.
|
|
Regimental Colours
If the bearer’s unit contains a Captain, the unit is considered to be within range of any model with Orders for the purposes of choosing a target to give an Order.
|
Regimental Colours
If the bearer’s unit contains a Captain, the unit is considered to be within range of any model with Orders for the purposes of choosing a target to give an Order.
|
|
Marksman's Pennant
The bearer’s unit gains Stand and Shoot.
|
Marksman's Pennant
The bearer’s unit gains Stand and Shoot.
|
|
Flaming Standard
The bearer’s unit gains Flaming Attacks (Melee & Shooting).
|
Flaming Standard
The bearer’s unit gains Flaming Attacks (Melee & Shooting).
|
|
Rending Banner
One use only. May be activated at the start of a Round of Combat, when Choosing Equipment and Abilities. All models in the unit gain +1 AP until the end of combat.
|
Rending Banner
One use only. May be activated at the start of a Round of Combat, when Choosing Equipment and Abilities. All models in the unit gain +1 AP until the end of combat.
|
|
Sheltering Standard
Attacks with AP 3 or less can never reduce the Armour Save roll of the bearer’s unit to worse than 6+.
|
Sheltering Standard
Attacks with AP 3 or less can never reduce the Armour Save roll of the bearer’s unit to worse than 6+.
|
|
Stalker’s Standard
The bearer’s unit gains Strider.
|
Stalker’s Standard
The bearer’s unit gains Strider.
|